Paypal shopping cart...
| |
| WATER CHUCK (NEW) - FOR DRILLING GLASS & HARD MATERIALS |
£88.13 |
 For Drilling Glass and Hard Materials. No. 2 Morse Taper Shank to fit into a Drilling Machine, with 3 New Diamond Drills - 6mm, 8mm and 10mm
|
| |
|
| |
| HS10 HAND LEVER SHEAR, (NEW) |
£115.15 |
 3mm Capacity Hand Shear, 250mm Blade
|
| |
|
| |
| ECLIPSE M146 MAGNETIC CHUCK |
£117.50 |
 Eclipse 14" x 6" Magnetic Chuck
|
| |
|
| |
| 6" SWIVEL BASE MACHINE VISE |
£146.88 |
 153mm Jaw Width, 130mm Opening.
|
| |
|
| |
| ABWOOD MILLING MACHINE VISE |
£176.25 |
 Abwood 6" Swivel Base Milling Machine Vise, 5" Opening.
|
| |
|
| |
| EDWARDS ED100 HIGH VACUUM PUMP |
£176.25 |
 Speedivac Model ISC 50B, 240 Volt
|
| |
|
| |
| MEDDINGS WET SANDSTONE GRINDER |
£176.25 |
 12" x 2" Wheel, 415V, 3 Phase
|
| |
|
| |
| MEDDINGS WET SANDSTONE GRINDER |
£176.25 |
 For Fine Sharpening of Edge Tools
|
| |
|
| |
| UNION 10" PEDESTAL GRINDER |
£176.25 |
 10" x 7/8" Wheels, with Coolant Facility.
|
| |
|
| |
| PANGBORN FINE DUST EXTRACTOR WITH AUTO SHAKER |
£223.25 |
 3hp Motor
|
| |
|
| |
| SYKES PICKAVNT 095800 INTERNAL EXTRACTOR SET |
£229.13 |
 Internal Extractor Set, Split Collet Type. Suitable for Extracting Bearings from Blind Housings. Nine Individual Collets, Covering Bores from 6mm to 60mm
|
| |
|
| |
| MECHANICS PLANT G6 PRECISION DRILL |
£293.75 |
 6mm Capacity Precision Drill, with Albrecht Keyless Chuck
|
| |
|
| |
| TAPER TURNING ATTACHMENT - UNUSED |
£346.63 |
 To suit Colchester Student 1800.
|
| |
|
| |
| ARBOGA EP308 8" PEDESTAL GRINDER & 700L SHARPNER WITH EXTRACTION |
£411.25 |
 Overhauled 8" x 7/8" Wheels, Dust Extraction, Face Wheel for Tool Grinding
|
| |
|
| |
| CANNING PEDESTAL POLISHING SPINDLE, 3 HP, 2820 RPM |
£411.25 |
 Canning Pedestal Polishing Spindle Type 1012, 3hp, 2820 rpm, 415V, complete with Dust Hoods. Good Bearings, Smooth Running
|
| |
|
| |
| ELLIOT PROGRESS NO. 1 1/2" CAPACITY BENCH DRILL 415V |
£411.25 |
 Overhauled, Four Speeds, with Good Chuck and Guard Large 13" x 13" Table, Tee Slotted Base.
|
| |
|
| |
| FOBCO STAR 1/2" BENCH DRILLING MACHINE, 230 VOLTS SINGLE PHASE |
£411.25 |
 With 1/2" Capacity Chuck and Guard.
|
| |
|
| |
| NEDERMAN FILTERCART FUME EXTRACTOR 600641, HARDLY USED, IN EXCELLENT CONDITION |
£411.25 |
 240 Volt, 900 Watt. Ex. University Machine. In Excellent Condition
|
| |
|
| |
| REMS TURBO CU-INOX SAW FOR STAINLESS TUBES (NEW), 230 VOLTS |
£440.63 |
 Compact Portable Circular Pipe Sawing Machine, 230 Volts. For Burr Reduced, Dry Sawing of Stainless Steel and Copper Tubes.
Complete with Blade.
|
| |
|
| |
| RJH CENTAUR GRINDER POLISHER ON DUST EXTRACTOR BASE |
£440.63 |
 1hp Industrial Motor, Fitted with 8" Grinding Stone, and Polishing Mop. Can also be used with Wire Wheel.
Mounted on Extractor Base.
|
| |
|
| |
| ARBOGA 300MM EP312 PEDESTAL GRINDER 415V |
£464.13 |
 Overhauled. 300 x 35mm Wheels. Solid Machine. Heavy Tool Rests
|
| |
|
| |
| EDWARDS BOX PAN & FOLDER 36" x 18G |
£763.75 |
 Full 40" of Fingers.
|
| |
|
| |
| INGERSOLL RAND TYPE 30 AIR COMPRESSOR |
£763.75 |
 Type 30 Compressor, Model 253, 4KW Motor, Working Pressure up to 200 psi.
|
| |
|
| |
| GRIGGIO AUTOMATIC PLANER KNIFE GRINDER, 600MM CAP. |
£881.25 |
|
| |
|
| |
| SIPEST LS102/6 PROFILE SANDER |
£881.25 |
 Horizontal and Vertical Modes, 1.5hp Motor.
|
| |
|
| |
| SHORTE POWER FLANGER 16G |
£998.75 |
 To Form a Square Edge on Ducting Material up to 16 Gauge.
|
| |
|
| |
| SAMCO MINI ROUTER |
£1,116.25 |
 1/2" Collet Chuck. Belt Drive Machine
|
| |
|
| |
| UNION GRADUATE 6" x 30" WOODTURNING LATHE |
£1,116.25 |
 With 8" faceplates RH and LH, 7" and 14" toolrests, driving centre.
|
| |
|
| |
| WADKIN B800 BANDSAW 800MM THROAT - FOOT BRAKE |
£1,116.25 |
 32" Vertical Woodcutting Bandsaw. 5hp Motor, 13" Under Guide, 31" Throat, 30"x30" Table.
|
| |
|
| |
| SEDGWICK TA315 TILTING ARBOR SAW WITH SLIDING TABLE |
£1,410.00 |
 Sedgwick TA315 Saw, 3KW 415V, with 620mm Cross Cutting Table, 315mm Blade, Telescopic Mitre Fence with Flip over Stop
|
| |
|
| |
| WILSON 36" DNR BANDSAW - FOOT BRAKE |
£1,410.00 |
 Heavy Duty Machine. Max. Blade Width 32mm
|
| |
|
| |
| SEDGWICK MB 12" PLANER THICKNESSER |
£1,703.75 |
 Sedgwick 308 x 230mm Planer Thicknesser, Excellent Condition
|
| |
|
| |
| BEAVER DR2 TURRET MILL |
£1,762.50 |
 44" x 10" Table, 2.2kw Motor, 40 Int. Spindle, Two Axis Anilam DRO
|
| |
|
| |
| ELLIOTT MENTORMILL TYPE VO-A2F SMALL TURRET MILL |
£1,762.50 |
 EME Mentormill, 30" x 7" Table, R8 Taper, 1.5hp Motor, 10 Spindle Speeds 160-2640 rpm, 6 Table Feed Speeds, Separate Coolant Tank, Excellent Condition....
|
| |
|
| |
| WADKIN BURSGREEN 12"BAO/S PLANER THICKNESSER |
£1,938.75 |
 12" x 7" Planer/Thicknesser
|
| |
|
| |
| EDWARDS TRH26 PYRAMID SHEET METAL ROLLS 6' x 1/8" |
£2,173.75 |
 3mm Capacity Powered Roll.
|
| |
|
| |
| WADKIN RM PLANER THICKNESSER 20" x 9" WITH BRAKE |
£2,232.50 |
 A Very Fine Machine, Fully Overhauled, Table Rises Easily
|
| |
|
| |
| WADKIN LS ROUTER WITH COMPOUND TABLE |
£2,291.25 |
 18000 ad 24000 rpm, 4 to 8hp Motor. Travel Table 24" x 16"
|
| |
|
| |
| COMPAIR CYCLON 6050N AIR COMPRESSOR, 50 HP, 189 CFM at 150 PSI |
£2,338.25 |
 Rotary Screw Compressor, 50hp, 27379 Hours Run Time
|
| |
|
| |
| MORGAN 6 ft x 1/8" SC HEAVY DUTY GUILLOTINE |
£2,643.75 |
 With Front Squaring Arm.
|
| |
|
| |
| ADDISON AUTOMATIC BANDSAW CB 250A |
£2,937.50 |
 250mm Diameter Automatic Bandsaw, 300 x 175mm Rectangles.
|
| |
|
| |
| WADKIN CK90R AUTOMATIC CROSS CUT SAW |
£2,937.50 |
 500mm Blade. Maximum Capacity 305 x 100mm. 7.5 hp Motor
|
| |
|
| |
| GMC VERTICAL PANEL SAW KGS/510S - 4 METRE |
£3,818.75 |
 4hp Motor. Cutting Length 4300mm. Cutting Height 1950mm. Cutting Depth 60mm
|
| |
|
| |
| AJAX AJT1 TURRET MILL IN SUPERB CONDITION |
£4,112.50 |
 SUPERB CONDITION50" x 10" Table, Variable Speed Head, Table Feed, Autolock Chuck, Two Axis Anilam DRO, Must be Seen.
|
| |
|
| |
| KINGSLAND J25XA METALWORKER |
£5,287.50 |
 95 Ton Heavy Duty Steelworker, Overhauled, with New Tooling, Rectangular Notch and Vee Notch.
|
| |
|
| |
| SMITHS SIX HEAD CHAIN MORTISER WITH PNEUMATIC CLAMPING |
£5,287.50 |
 20hp Motor. Complete with Chains and Bars. This machine is in good condition.
|
| |
|
